TOP > Getting Started > Installing Accessories > Attaching the Belt Clip or Belt Loop (Option) Attaching the Belt Clip or Belt Loop (Option) You can carry the product around hands free by attaching the provided belt clip or the belt loop (option) to the product, so you can fasten the product to your waist. 1. Fasten the belt clip to the 2 screw holes on the bottom of the product. • The customer must prepare the Philips screwdriver.• This is the same as when using the belt loop (option). If the screws are difficult to attach, tilt the clip part.2. Attach the belt clip to your own belt from above. • To use the belt loop (option), remove the fastening tape (1) from the lower part, attach it to the belt (2), and then refasten the tape. Back to top
