[Applications] Menu

Initial values refer to the values set for the product when it was shipped from the factory. If you reset the product, the values set in the product are initialized. The table below shows the initial value of each setting item and whether it would be initialized.

• Normally, it is not necessary to perform the initialization. Doing an initialization removes all the product's settings that the customer changed.

Setting Item				Initial Value	Initialized by User Reset/Factory Reset
[Protocol]				[AUTO]	Yes/Yes
[SBPL]
	[Show Error]			[Disabled]	Yes/Yes
	[Standard Code]			[Enabled]	Yes/Yes
	[Orientation]			[Portrait]	Yes/Yes
	[Font Settings]
		[Zero Slash]		[Enabled]	Yes/Yes
		[Kanji]
			[Kanji Set]	[GB18030]	Yes/Yes
			[Character Code]	[GB18030]	Yes/Yes
			[Kanji Style]	[Gothic]	Yes/Yes
		[Proportional]		[Enabled]	Yes/Yes
		[Code Page]		858	Yes/Yes
		[€]		d5	Yes/Yes
	[Compatible]
		[CODE128(C) Zero Fill]		[Disabled]	Yes/Yes
		[Kanji Command]		[Disabled]	Yes/Yes
		[Call Font/Logo]		[Disabled]	Yes/Yes
		[PDF417 ECC Level fixed]		[Disabled]	Yes/Yes
[SZPL]
	[Label]
		[Shift]		0 dot	Yes/Yes
		[Top]		0 dot	Yes/Yes
	[Label Rotation]			[0 degree]	Yes/Yes
	[Caret]			94 (^)	Yes/Yes
	[Delimiter]			44 (,)	Yes/Yes
	[Tilde]			126 (~)	Yes/Yes
	[Clock Format]			[(none)]	Yes/Yes
	[Default Font]			[(none)]	Yes/Yes
[SIPL]
	[Font Settings]
		[Code Page]		1252	Yes/Yes
		[New Font Encoding]		[Disabled]	Yes/Yes
		[Proportional]		[Disabled]	Yes/Yes
		[Zero Slash]		[Disabled]	Yes/Yes
	[Format Save]			[Enabled]	Yes/Yes
	[Label Rotation]			[0 degree]	Yes/Yes
[STCL]
	[Command Head]
		[Control Code]		[Auto]	Yes/Yes
		[1st Byte Code]		27	Yes/Yes
		[2nd Byte Code]		10	Yes/Yes
		[3rd Byte Code]		0	Yes/Yes
	[Font Settings]
		[Zero Slash]		[Disabled]	Yes/Yes
		[€]		d5	Yes/Yes
		[Code Page]		850	Yes/Yes
		[Half-width Symbol]		[Enabled]	Yes/Yes
	[Rotation]			[0 degree]	Yes/Yes
	[Ignore Paper Size Command]			[Disabled]	Yes/Yes
[SDPL]
	[Control Code]
		[Code Type]		[Standard]	Yes/Yes
		[SOH]		01	Yes/Yes
		[STX]		02	Yes/Yes
		[CR]		0D	Yes/Yes
		[CNTBY]		5E	Yes/Yes
	[Label Rotation]			[0 degree]	Yes/Yes
	[SOP Emulation]			[Auto]	Yes/Yes
	[Compatible Mode]
		[TTF]		[Disabled]	Yes/Yes
		[Graphics]		[Disabled]	Yes/Yes
		[Compression]		[Disabled]	Yes/Yes
	[Right-to-Left print]			[Auto]	Yes/Yes
	[Receive TimeOut]			0 (Off)	Yes/Yes
	[Blank Item Feed]			[Enabled]	Yes/Yes
	[Prioritize]
		[Format Attribute]		[Commands]	Yes/Yes
		[Pause Mode]		[Commands]	Yes/Yes
		[1 Byte Codepage]		[Commands]	Yes/Yes
		[SDPL Measure Unit]		[Commands]	Yes/Yes
		[Scalable Font Style]		[Commands]	Yes/Yes
		[Sensor Type]		[Commands]	Yes/Yes
		[Feedback Character]		[Commands]	Yes/Yes
		[SOH Commands]		[Commands]	Yes/Yes
		[Module Selection]		[Commands]	Yes/Yes
	[Format Attribute]			[XOR]	Yes/Yes
	[Pause Mode]			[Disabled]	Yes/Yes
	[1 Byte Codepage]			[CP 850]	Yes/Yes
	[SDPL Measure Unit]			["]	Yes/Yes
	[Scalable Font Style]
		[Bold]		[Disabled]	Yes/Yes
		[Italic]		[Disabled]	Yes/Yes
	[Feedback Character]			[Enabled]	Yes/Yes
	[SOH Commands]
		[All Commands]		[Enabled]	Yes/Yes
		[SOH-B Command]		[Enabled]	Yes/Yes
		[SOH-C Command]		[Enabled]	Yes/Yes
		[Others]		[Enabled]	Yes/Yes
	[Module Selection]			A	Yes/Yes
[AEP]
	[Enable]			[Disabled]	No/Yes
	[Starting Application]			Standard Demo	No/Yes
	[Delete Application]			-	-
	[Label Rotation]			[Disabled]	Yes/Yes