About the Base Reference Point

The base reference point is the point at which one determines the print position and stop/dispensing position.

The base reference point differs depending on the print mode or media sensor you use.

　

Continuous Mode

I-mark label	Gap label
(1) Feed direction (2) Print position	(1) Feed direction (2) Print position

　

Tear-Off Mode

I-mark label	Gap label
(1) Feed direction (2) Tear-off position (3) Print position	(1) Feed direction (2) Tear-off position (3) Print position

　

Dispenser Mode

I-mark label	Gap label
(1) Feed direction (2) Dispensing position (3) Print position	(1) Feed direction (2) Dispensing position (3) Print position

　

Linerless Tearoff Mode

I-mark Linerless Label

(1) Feed direction (2) Tear-off position (3) Print position