Hardware

Dimensions and Weight

Item	Description
External dimensions	180 mm (7.09") (width) x 195 mm (7.68") (depth) x 85 mm (3.35") (height) (excludes projections)
Weight	Approx. 1440 g (3.2 lb) (including the battery, not including media)

　

Power Supply

Item	Description
Input Voltage	AC 100 - 240 V
Output Voltage	DC 19 V　2.37 A
Frequency	50 Hz-60 Hz
Battery specifications	Lithium-ion battery Nominal voltage 14.4 V Nominal capacity 2500 mAh Charge/discharge cycle Approx. 300 cycles or 3 years from the start of use, whichever comes first. Charging time ◦ When using AC adapter: About 3 hours ◦ When using cigarette lighter adapter (option): About 3 hours ◦ When using 12-60V DC power supply (option): About 3 hours ◦ When using 1ch battery charger (option): About 3 hours ◦ When using 4ch battery charger (option): About 4 hours *The charge/discharge cycle and charging time vary depending on the operating environment.
Battery eliminator (option) specifications	Dummy battery Input voltage 14.4 V 3.0 A Output voltage 14.4 V 2.9 A
Power Consumption	Input voltage conditions: AC 100 - 240 V, 50 - 60 Hz When charging 55 VA/28 W (AC100 V/50 Hz) 83 VA/28 W (AC230 V/50 Hz) Standby 10.0 VA/3.3 W (AC100 V/50 Hz) 15.2 VA/3.6 W (AC230 V/50 Hz)

　

Processing

Item	Description
Flash ROM	8GB
SDRAM	1GB
User Registration Area	Maximum 2GB
Receive Buffer	Buffer full 2.95MB Buffer near full Occurrence: 2 MB, Release: 1 MB

　

Operation

Item	Description
LCD	TFT color 2.4-inch
LED	STATUS Blue/Red Battery Green
Display Language	English / German / French / Spanish / Italian / Portuguese / Brazilian Portuguese / Czech / Danish / Dutch / Finnish / Greek / Hungarian / Norwegian / Polish / Romanian / Russian / Slovak / Swedish / Turkish / Chinese (Simplified) / Chinese (Traditional) / Korean / Japanese / Arabic / Thai / Vietnamese / Persian / Indonesian / Hindi / Bulgarian

　

Environmental Conditions

Item	Description
Operating Temperature	Standard -15 to 50 °C (5 to 122 °F) (environment except when printing or feeding) Linerless Tearoff Mode 5 to 35 °C (41 to 95 °F)
Storage temperature	-25 to 60 °C (-13 to 140 °F)
Charging temperature range	5 to 35 °C (41 to 95 °F)
Operating Humidity	Standard 10 to 90% RH (Non-condensing) Linerless Tearoff Mode 30 to 75% RH (Non-condensing)
Storage humidity	Standard 10 to 90% RH (Non-condensing) Linerless Tearoff Mode 30 to 75% RH (Non-condensing)
Charging humidity	20 to 80% RH (Non-condensing)

　

Print

Item	Description
Print Method	Direct thermal
Print Speed	2 to 6 inches/sec (50.8 to 152.4 mm/sec) *Dispenser mode, linerless tear-off mode: Maximum 4 inches/sec (101.6 mm/sec) Note that the speed may be limited depending on the print layout, ambient temperature or battery level.
Resolution (Head Density)	203 dpi (8 dots/mm)
Non-printable Area	Continuous, dispenser, tear-off Pitch direction (Excludes liner) Top: 1.5mm (0.06"), Bottom: 1.5 mm (0.06") Width direction (Excludes liner) Left: 1.5 mm (0.06"), Right: 1.5 mm (0.06") Linerless tearoff Pitch direction Top: 5.0mm (0.2"), Bottom: 1.5 mm (0.06") Width direction Left: 1.5 mm (0.06"), Right: 1.5 mm (0.06") *May affect the print quality. Be sure to avoid the non-printable area when printing.
Printable Area	Length 1000 mm (39.37") x Width 104 mm (4.09")
Print End Position	0 to 8000 dots (1 dot = 0.125mm)
Print darkness	Darkness level 1 to 10

　

Sensors

Item	Description
I-mark (reflective type)	Adjustable
Gap (transmissive type)	Adjustable
Cover open	Fixed
Paper End Sensor	Detect with I-mark sensor or Gap sensor
Dispenser (reflective type)	Fixed
Linerless (reflective type)	Fixed

• Specifications are subject to change without notice.