TOP > Adjusting the Product > Flow of Printing Operations > Operations in Tear-Off Mode > Tear-off Mode/Media Sensor Disabled Tear-off Mode/Media Sensor Disabled Operation *1 After printing, if the period specified in Option Waiting Time <TW> (initial value: 0 ms) has passed and if there is no print data remaining, the product will feed the media to the position for manual cutting. • The spaces between each layout varies depending on the print speed. In the figure above, as you set the print speed faster, the space between the first and second print becomes wider. Timing Chart (When <TW> is 0) Without head check With head check Back to top
