Linerless Mode, Backfeed Before Printing, with Media Sensor Disabled

Operation

*1 The dispenser sensor checks the presence of labels; and the product does not perform the next operation until manual cutting is performed.

*2 Adjustment of the feed position is only done after moving to the start position using the various adjustment functions. If no adjustment is done, then start printing without a feed operation. The direction of feed changes depending on the adjustments.

• The figure above shows the reference position when the I-mark sensor is used. • The spaces between each layout varies depending on the print speed. In the figure above, as you set the print speed faster, the space between the first and second print becomes wider.

Timing Chart (Without Head Check)

Timing Chart (With Head Check)