CL4NX/CL6NX Operator Manual
SATO

MENU

How to Search

MENU

  • TOP (Table of Contents)
  • Getting Started
  • Searching from Category
  • Searching by Function Names
  • Searching According to What You Want to Do
  • Troubleshooting
  • Support and Warranty
Close
TOP > Various Settings of the Product > The Product's [Settings] Menu > [Interface] Menu > [Network] > [Services] > [Online Services] (SOS users only) > [QR code offset] (SOS users only) > [Horizontal] (SOS users only)
[Horizontal] (SOS users only)
Adjust the print position of the QR code in the horizontal direction.
Set the correction value from the print reference position when facing the product as "-" to adjust to the right side and "+" to adjust to the left side.
(1) Feed direction
The setting range is from -792 to +792 dots.
 
•
The length of 1 dot varies depending on the print resolution of the product.
◦
203 dpi : 1 dot = 0.125 mm (0.0049")
◦
305 dpi : 1 dot = 0.083 mm (0.0033")
◦
609 dpi : 1 dot = 0.042 mm (0.0017")

Related Topics
Setting Value Input or Selection

Back to top

© 2023 SATO Corporation. All rights reserved.