Adjusting the Print Darkness

The adjustment procedure for the print darkness is as follows:

• You can fine tune the print darkness by setting the [Darkness Adjust] in the [Printing] > [Advanced] > [Adjustments] menu. • When the [Printing] > [Advanced] > [Prioritize] menu has been set to [Commands] and the print darkness is specified by command, the data will be printed with the print darkness specified by the command. • While the print job is paused, the [Adjustments] menu will appear instead of the [Settings] menu and you can adjust the print darkness.

1.	When the product is in Online mode, press the button to change to Offline mode.

2.	Press the button to show the [Settings] menu.

3.	Press the / buttons to select [Printing], and then press the button.

4.	Press the / buttons to select [Darkness], and then press the button.

The [Darkness] screen appears.

5.	Press the / buttons to select a value.

The setting range is from 1 to 10. 1 is the lightest and 10 is the darkest.

6.	Press the button or button to save the setting value.

7.	Press the button to change to Offline mode.

8.	Press the button again to change to Online mode.

You can print to check the print quality.