[Wi-Fi] Menu

The initial value refers to the setting value of the product when it was shipped from the factory. The table below shows the initial value of each setting item.

Setting Item						Initial Value
[Enable]						Enabled
[Wi-Fi Setting]
	[IPv4 (Wi-Fi)]
		[Mode]				DHCP
		[DHCP]				-
		[IP Address]				0.0.0.0
		[Netmask]				255.255.255.0
		[Gateway]				0.0.0.0
		[DNS]				0.0.0.0
	[IPv6 (Wi-Fi)]
		[Mode]				Disable
		[DHCP]				-
		[IP Address]				::
		[Prefix Length]				64
		[Gateway]				::
		[DNS]				::
	[Proxy (Wi-Fi)]
		[Enabled]				Disabled
		[Server]				-
		[Exclude]				-
	[DHCP Options]
		[Update DNS (Option 81)]				Disabled
		[Hostname]				sato-wlan-<SERIAL_NO>
	[Port]
		[Port1]				1024
		[Port2]				1025
		[Port3]				9100
		[Flow Control]				STATUS4 ENQ
		[TCP Connection Queue]				Enabled
		[Legacy Status for Port 9100]				Disabled
		[BCC]				Disabled
		[Delay Reply ENQ]				0 ms
		[Status4 Cyclic Response]				500 ms
	[Wi-Fi Protected Setup(WPS)]
		[Button (PBC)]				-
		[PIN]				-
	[Wi-Fi Direct]
		[Device Name]				SATO_PRINTER
		[Connect]				-
		[Start Group]				-
		[Remove Group]				-
		[Disconnect]				-
		[SSID]				DIRECT-xx
		[IP Address]				x.x.x.x
		[Passphrase]				xxxxxxx
		[Channel]				-
	[Wi-Fi Connection Setting]
		[SSID]				SATO_PRINTER
		[Hidden SSID]				Enabled
		[Mode]				Ad-hoc
		[Channel]				6
		[Security]				None
	[WEP Conf.]
		[Authentication]				Open System
		[Key Index]				1
		[Key #1]-[Key #4]				-
	[WPA Conf.]
		[WPA Authentication]				Personal (PSK)
		[PSK]				-
	[EAP Conf.]
		[EAP Mode]				FAST
		[ECC Cipher Suites]				Disabled
		[Inner Method]				AUTO
		[Username]				-
		[Password]				-
		[Anon. Outer ID]				-
[Verify Server Cert.]				Enabled
[Private Key P/W]				-
[PAC Auto Provisioning]				Disabled
[PAC Password]				-