TOP > Getting Started > Connecting the Product to a Computer > Connecting Interfaces > NFC Interface Connection (Standard) NFC Interface Connection (Standard) The NFC interface of the product supports a handover function that simplifies the Bluetooth/Wi-Fi connection setup with Android devices. The handover function only performs the connection setup, such as the pairing and authentication with NFC, and passes the actual interface to the more advanced Bluetooth and Wi-Fi when communicating between NFC supported devices. In general, the pairing and authentication require some procedures to enter authentication information, but the connection can be completed simply by holding the Android devices over the product while using NFC. Touch the NFC antenna (1) of the product with the NFC mark on the Android device. • If it does not communicate well, shift the Android device to the front, back, left and right, and then hold it up again. • For the operation of the NFC for the Android device, refer to the user manual for the Android device. Back to top