LAN Interface Connection (USB+LAN Model Only)

Connect the interface cable when the product is powered off.

Connect the LAN cable to the LAN connector (1) on the product.

The communication condition settings must be configured according to your network environment. Set the IP address of the product.

The IP address of the product can be set through the product's [Interface] menu or the All-In-One Tool.

• To use the printer driver, the communication protocol must be set to Status4. (The initial value of the communication protocol for the product's LAN interface is Status4 ENQ.)

---

Related Topics

Configuring the Interface Settings Using the All-In-One Tool

Configuring the Interface Settings from the Settings Mode of the Product