Adjusting the Print Darkness

The adjustment procedure for the print darkness is as follows:

• You can fine tune the print darkness by setting the [Darkness Adjust] in the [Printing] > [Advanced] > [Adjustments] menu. • When the [Printing] > [Advanced] > [Prioritize] menu has been set to [Commands], the data will be printed with the print darkness specified by command. • While the print job is paused, the [Adjustments] menu will appear instead of the [Settings] menu and you can adjust the print darkness.

1.	Tap on the Home screen or Offline screen to show the [Settings] menu.

2.	Input the password if it is enabled.

3.	Tap [Printing].

4.	Tap [Darkness].

5.	Change the setting value.

The setting range is from 1 to 10. 1 is the lightest and 10 is the darkest.

6.	Tap to save the setting value.

7.	Press the / (Standby/Home) button to show the Home screen.

8.	Press the / (Standby/Home) button again to change to Online mode.

You can print to check the print quality.

---

Related Topics

Logging In to/Logging Out of the Settings Mode