[Interface] Menu

The initial value refers to the setting value of the product when it was shipped from the factory. The table below shows the initial value of each setting item.

Setting Item							Initial Value
[Network]
	[Settings]
		[LAN]
			[IPv4 (LAN)]
				[Mode]			DHCP
				[DHCP]			-
				[IP Address]			0.0.0.0
				[Netmask]			255.255.255.0
				[Gateway]			0.0.0.0
				[DNS]			0.0.0.0
			[IPv6 (LAN)]
				[Mode]			Disable
				[DHCP]			-
				[IP Address]			::
				[Prefix Length]			64
				[Gateway]			::
				[DNS]			::
			[Ports]
				[Port1]			1024
				[Port2]			1025
				[Port3]			9100
				[Flow Control]			STATUS4 ENQ
				[TCP Connection Queue]			Enabled
				[Legacy Status for Port 9100]			Disabled
				[BCC]			Disabled
				[Delay Reply ENQ]			0 ms
				[Status4 Cyclic Response]			500 ms
			[Proxy (LAN)]
				[Enabled]			Disabled
				[Server]			-
				[Exclude]			-
			[DHCP Options]
				[Update DNS (Option 81)]			Disabled
				[Hostname]			sato-lan-<SERIAL_NO>
	[Services]
		[NTP]
			[Enable]				Disabled
			[Error]				Disabled
			[Time Server IP]				0.0.0.0
		[LPD]
			[Enable]				Enabled
			[DNS Lookup]				Disabled
		[FTP]
			[Enable]				Disabled
			[FTP Timeout]				300 sec
		[SNMP]
			[sysContact]				-
			[sysName]				-
			[sysLocation]				-
			[prtMarkerCounterUnit]				meters
			[Agent]
				[Enable]			Enabled
				[Read-Only]
					[SNMP Version]		1|2c|3
					[Community]		public
					[User]		rouser
					[User Security]		None
					[Authentication Protocol]		MD5
					[Authentication Passphrase]		mypassword
					[Privacy Protocol]		DES
					[Privacy Passphrase]		mypassword
				[Read-Write]
					[SNMP Version]		Disabled
					[Community]		private
					[User]		rwuser
[User Security]					None
[Authentication Protocol]					MD5
[Authentication Passphrase]					mypassword
[Privacy Protocol]					DES
[Privacy Passphrase]					mypassword
[Traps]
	[Enable]			Disabled
	[SNMP Version]			1
	[IP Version]			4
	[Destinations]			1
	[Destination 1]			0.0.0.0
	[Destination 2]			0.0.0.0
	[Destination 3]			0.0.0.0
	[Community]			trapcom
	[User]			trapuser
	[Engine ID]			Hex string generated from MAC address
	[Security]			None
	[Authentication Protocol]			MD5
	[Authentication Passphrase]			mypassword
	[Privacy Protocol]			DES
	[Privacy Passphrase]			mypassword
[Online Services]
	[SOS Mode]				Disabled
	[Allow Remote Control]				Always
	[MQTT Protocol]				MQTT
	[Add Device]				-
	[Contact Information]
		[Phone Number]			-
	[Periodic Notification]
		[Type]			Disabled
		[Counter]			Thermal Head
		[Head]
			[Meters]		1,000
			[Last Update]		0.0 km
			[Next Update]		1.0 km
			[Current Value]		0.0 km
		[Cutter]
			[Cuts]		10,000
			[Last Update]		0
			[Next Update]		10,000
			[Current Value]		0
		[Notifications]			1
		[Time 1]			00:00
		[Time 2]			00:00
		[Time 3]			00:00
		[Weekday]			Monday
		[Day]			1
		[Time]			00:00
	[Update Screen]				Normal
	[QR code offset]
		[Vertical]			0 dot
		[Horizontal]			0 dot
	[Daily Checkup]				-
[Advanced]
	[ARP Announcement]
		[Additional]				Enabled
		[Periodic]				0
	[Firewall]
		[Enable]				Disabled
		[Allow Services And Ports]
			[Data Ports]			Enabled
			[FTP]			Disabled
			[LPD]			Enabled
			[MAILC]			Enabled
			[NTP]			Disabled
			[Online Services]			Disabled
			[PING]			Enabled
			[Proxy]			Disabled
			[SATO All-In-One Tool]			Enabled
			[SCP]			Enabled
			[SNMP Agent]			Enabled
			[WEBC]			Enabled
			[WebConfig]			Enabled
		[Custom Settings]
			[TCP Source Port]
				[Existing Port No.]		22 80 443 465 587 8080
				[Additional Port No.]		-
			[TCP Destination Port]
				[Existing Port No.]		80 443 515 1024 1025 9100
				[Additional Port No.]		-
			[UDP Source Port]
				[Existing Port No.]		53
				[Additional Port No.]		-
			[UDP Destination Port]
				[Existing Port No.]		68 161 19541
				[Additional Port No.]		-
			[ICMP Type]
				[Existing ICMP Type]		0 8
				[Additional ICMP Type]		-
[USB]
	[Flow Control]						STATUS4
	[BCC]						Disabled
	[Change USB Serial]						Disabled
[NFC]
	[I/F Enable]						Enabled
[Ignore CR/LF]							Disabled
[Ignore CAN/DLE]							Disabled