Error Message 1118 (Write/Read Values Are not Consistent)

When there is an error with the product, the error message appears on the screen.

Check the cause and countermeasure, and then take appropriate action.

　

To clear the error:

Press the button (RETRY), and then execute the retry/release operation set in [Retry Mode], or press the button (ABORT).

Retry Mode

To cancel an entire print job, open and close the top cover to switch the product to Offline mode, and then press the button (CANCEL).

Cause and Countermeasure	Reference
Except FeliCa Cause (1) The written value and read value do not match. Countermeasure (1) Confirm the inlay and check the product and antenna settings.	RFID Settings (RFID Models Only) RFID (RFID Models Only)
FeliCa only Cause (2) The written value and read value do not match. A value greater than original data was written to subtraction register. Countermeasure (2) Write an appropriate value to subtraction register.	-

Contact your SATO technical support if the error cannot be resolved.

Contact Information for When You Are in Trouble

• You cannot use an RFID tag that has caused an RFID tag error. An error message is printed on the RFID tag that caused the error.