TOP > Various Settings of the Product > The [Settings] Menu > [Applications] Menu > [STCL] [STCL] To use STCL as a printer command, set the following items: [Command Head]Set the command head.The setting items are as follows:[Control Code]Set the control code.The options are as follows:AutoPerform the protocol detection automatically.ESC|LF|NULSet the control code to ESC|LF|NUL.7B|7C|7DSet the control code to 7B|7C|7D.CustomChange the first to third byte codes. • A message prompting you to restart the product will appear on the Online/Offline screen if you have made any changes. In such a case, reboot the product to apply the settings.[1st Byte Code]Set the first byte code.You can change the code only if you have selected [Custom] in the [Control Code] menu.The setting range is from 0 to 255.[2nd Byte Code]Set the second byte code.You can change the code only if you have selected [Custom] in the [Control Code] menu.The setting range is from 0 to 255.[3rd Byte Code]Set the third byte code.You can change the code only if you have selected [Custom] in the [Control Code] menu.The setting range is from 0 to 255.[Font Settings]Set the font.The setting items are as follows:[Zero Slash]Set whether to print the number zero (0) with or without a slash (/).The options are as follows:EnabledPrint zero with a slash.DisabledPrint zero without a slash.[€]Set the European currency symbol to the ASCII code.The setting range is from 0 to FF (hexadecimal).[Code Page]Select the code page to be used from the list.[Half-width Symbol]Set whether to print symbols with half-width characters.The options are as follows:EnabledPrint symbols with half-width characters.DisabledDo not print symbols with half-width characters.[Rotation]Set the page orientation for label printing.The options are as follows:0 degreeLabels are printed in portrait orientation.90 degreeLabels are printed in landscape orientation.[Ignore Paper Size Command]Set whether to ignore a paper size command in the print data.The options are as follows:EnabledIgnore a paper size command in the print data.DisabledDo not ignore a paper size command in the print data.Related TopicsItem SelectionSetting Value Input or Selection Back to top
