Status Icon

The icons on the status bar of the display show the product's status.

(1) Status bar

Communication Interface Status

Icon	Description
	Bluetooth is enabled but not connected.
	Bluetooth is enabled and connected.
	Bluetooth startup failed.
	NFC is enabled but not connected.
	NFC is enabled and connected.
	Not connected to the NTP time server.
	Wi-Fi is authenticated, but not connected.
	Wi-Fi startup failed.
	Wi-Fi is connected. Signal Level: 1
	Wi-Fi is connected. Signal Level: 2
	Wi-Fi is connected. Signal Level: 3
	Wi-Fi is connected. Signal Level: 4
	Wi-Fi Direct is connected or the product is set to act as an access point.
	Product is connected to USB host.
	Standard code is disabled.
	The On-Demand mode of the SOS (SATO Online Services) is enabled.
	The Real Time mode or the Light mode of the SOS is enabled. The product is connected to the SOS cloud.
	The Real Time mode or the Light mode of the SOS is enabled, but not connected to the SOS cloud. If the Wi-Fi icon is grayed out, the product is not connected to the network. If the Wi-Fi icon is active, the Internet connection of the SOS cloud has a trouble.
	The product is not connected to the SOS cloud.
	Time period set for periodic notification for On-Demand mode for SOS has been reached. Scan the QR code and send the information to the SOS cloud.
	[SOTI Connect] is enabled, but [Start Auto Enrollment] is disabled.
	[SOTI Connect] and [Start Auto Enrollment] are enabled, but failed to enroll automatically.
	[SOTI Connect] and [Start Auto Enrollment] are enabled. The product successfully enrolled automatically.
	IP address could not be acquired. Or a communication error has occurred.

　

Security Status

Icon	Description
	A setting item related to security has a value that is not recommended.

• See the table below for setting items related to security and recommended setting values. Setting Item Recommended Setting Value [Interface] [Network] [Services] [FTP] [Enabled] [Disabled] [SNMP] [Agent] [Read-Only] [SNMP Version] 3 [Community] - [Security] [Privacy] [Authentication Protocol] [SHA] [Privacy Protocol] [AES] [Read-Write] [SNMP Version] 3 [Community] - [Security] [Privacy] [Authentication Protocol] [SHA] [Privacy Protocol] [AES] [Traps] [SNMP Version] 3 [Community] - [Security] [Privacy] [Authentication Protocol] [SHA] [Privacy Protocol] [AES] [Webconfig] [SSL/TLS Protocol] [TLS 1.0] [Disabled] [TLS 1.1] [Disabled] [TLS 1.2] [Enabled] [Cipher Suite] [Recommended] [Bluetooth] [Authentication] [Level 4] [System] [Password] [Password Enable] [Enabled] [Install Security] [All] [NFC Security] [Passwords] [Tools] [Save Print Image] [Disabled]

　

USB Memory Status

Icon	Description
	USB memory is connected.

　

Print Job Status

Icon	Description
	Waiting for media removal. Remove the media.
	Command error detected. Check the print data.
	Receive buffer is nearly full. Stop sending print data until the buffer is no longer nearly full.
	Defective print head is detected. Replace the print head.
	Incompatible print head is detected. Replace the print head.
	Dispenser sensor failed due to strong exterior light. To output the next media, remove the media, and go to online mode.

　

Maintenance Status

Icons notify you about cleaning the product and replacing parts at the set periods when [Notifications] is enabled.

Icon	Description
	Clean the print head or platen roller.
	Replace the print head.
	Replace the platen roller.

Battery Status (When [Eco Charge] is Disabled)

Icon	Description
	Shows the remaining battery level in an icon and percent.
	Shows that the battery is charging.
	Shows that the battery is not in a chargeable temperature range and cannot be charged.
	Shows that it is time to replace the battery.

Battery Status (When [Eco Charge] is Enabled)

Icon	Description
	Shows the remaining battery level in percent.
	Shows that the battery is eco-charging.
	Shows that the battery is not in a chargeable temperature range and cannot be charged.
	Shows that it is time to replace the battery.

---

Related Topics

[Notifications]