[Bluetooth]

Set the Bluetooth connection.

• Disabling the [Enable] menu, hides the items below the [Enable] menu.

The setting items are as follows:

[Enable]

Enable or disable the functions for Bluetooth.

The options are as follows:

Enabled

Enable the Bluetooth function.

Disabled

Disable the Bluetooth function.

[BT Operation Mode]

Set the operating mode for when Bluetooth is enabled.

The options are as follows:

Device

Set the product as a device to connect to other devices. The supported profiles are SPP and ISPP.

Host

Set the product as a host to connect to other devices. The supported profile is HID.

[Name]

Set the device name for the product.

You can enter 1 to 53 characters. Alphabets (capital and small letters), numbers and symbols can be used.

[PIN Code]

Set the PIN code.

You can enter 4 to 16 characters for the PIN code. Alphabets (capital and small letters), numbers and symbols can be used.

[BD Address]

Shows the BD address of the product. (You cannot change this address.)

[Firm Version]

Shows the firmware version of the Bluetooth. (You cannot change this value.)

[Host BD Address]

Check the Host BD address.

[Pairing]

Pair the product with a Bluetooth device.

Appears only if you have selected [Host] in the [BT Operation Mode] menu.

The items are as follows:

Available devices

The product searches for a Bluetooth device and shows the name of the device.

Paired devices

Shows a list of previously paired device. Select a device to reconnect to or to delete from the list.

• In [Available devices], only devices with an HID profile are shown. For example, keyboards, etc. • The product cannot connect to and communicate with multiple devices.

[IAP Ready]

Shows the operational status of the IAP authentication chip, enabling the communication between an iOS-equipped device and a Bluetooth device.

When the communication is enabled, is displayed.

[iOS Reconnect]

Disable the iOS reconnect function or set to the Manual mode.

The options are as follows:

Disabled

The product does not perform iOS reconnection. You need try reconnection from iOS device.

Manual

The product perform iOS reconnection when the product is powered on or it switches to online or offline.

[Authentication]

Set the authentication level.

The options are as follows:

None

None

Level 2-1

PIN code authentication, service level, no encryption

Level 2-2

PIN code authentication, service level, encryption

Level 3

PIN code authentication, link level, no encryption

Level 4

Secure Simple Pairing compatible, service level, encryption (Can be communicated with devices that are not compatible with Secure Simple Pairing)

[ISI]

Set the ISI communication parameter.

The setting range is 0, or from 18 to 4096.

Set to a value that is higher than the ISW communication parameter setting value.

[ISW]

Set the ISW communication parameter.

The setting range is 0, or from 18 to 4096.

The setting range varies depending on the ISI communication parameter setting value.

Set to a value that is less than the ISI communication parameter setting value.

[PSI]

Set the PSI communication parameter.

The setting range is from 18 to 4096.

Set to a value that is higher than the PSW communication parameter setting value.

[PSW]

Set the PSW communication parameter.

The setting range is 0, or from 18 to 4096.

The setting range varies depending on the PSI communication parameter setting value.

Set to a value that is less than the PSI communication parameter setting value.

[CRC Mode]

Enable or disable the CRC check function.

The options are as follows.

Enabled

Enable the CRC check function.

Disabled

Disable the CRC check function.

[Flow Control]

Set the communication protocol.

The options are as follows:

•

[STATUS3]

•	[STATUS4 MULTI]

•

[NONE]

---

Related Topics

Item Selection

Setting Value Input or Selection