[Tools] Menu

Initial values refer to the values set for the product when it was shipped from the factory. If you reset the product, the values set in the product are initialized. The table below shows the initial value of each setting item and whether it would be initialized.

• Normally, it is not necessary to perform the initialization. Doing an initialization removes all the product's settings that the customer changed.

Setting Item					Initial Value		Initialized by User Reset/Factory Reset
					S84NX	S86NX
[Test Print]
	[Factory]
		[Label Width]			[Large]		Yes/Yes
		[Pitch]			0 dot		No/No
		[Offset]			0 dot		No/No
		[Darkness Adjust]			50		No/No
	[Configure List]
		[Label Width]			[Small]		-
		[Label Length]			203 dpi 800 dots 305 dpi 1200 dots 609 dpi 2400 dots	203 dpi 800 dots 305 dpi 1200 dots	Yes/Yes
		[Pitch]			0 dot		No/No
		[Offset]			0 dot		No/No
		[Darkness Adjust]			50		No/No
	[Configure QR]
		[Label Width]			[Small]		-
		[Label Length]			203 dpi 800 dots 305 dpi 1200 dots 609 dpi 2400 dots	203 dpi 800 dots 305 dpi 1200 dots	Yes/Yes
		[Pitch]			0 dot		No/No
		[Offset]			0 dot		No/No
		[Darkness Adjust]			50		No/No
	[Paper Sensor]
		[Label Width]			[Small]		-
		[Label Length]			203 dpi 800 dots 305 dpi 1200 dots 609 dpi 2400 dots	203 dpi 800 dots 305 dpi 1200 dots	Yes/Yes
		[Pitch]			0 dot		No/No
		[Offset]			0 dot		No/No
		[Darkness Adjust]			50		No/No
	[Head Check]
		[Label Width]			203 dpi 832 dots 305 dpi 1248 dots 609 dpi 2496 dots	203 dpi 1340 dots 305 dpi 2010 dots	Yes/Yes
		[Label Length]			203 dpi 120 dots 305 dpi 180 dots 609 dpi 360 dots	203 dpi 120 dots 305 dpi 180 dots	Yes/Yes
		[Pitch]			0 dot		No/No
		[Offset]			0 dot		No/No
		[Darkness Adjust]			50		No/No
[HEX-Dump]
	[Hex Dump Mode]				[Disabled]		Yes/Yes
[Reset]
[Profiles]
	[Delete]				-		-
	[Load]				-		-
	[Save]				-		-
	[Start with]				-		Yes/Yes
[Certificates]					-		Yes/Yes
[Barcode Checker]
	[Test]
		[Reader Name]			-		-
		[Reading Test]			-		-
		[Interface]			[RS-232C]		Yes/Yes
	[Settings]
		[Mode]			[Disabled]		Yes/Yes
		[Set No. of Barcodes]			[Command]		Yes/Yes
		[Barcodes per Label]			1		Yes/Yes
		[Start Position]			203 dpi 72 dots 305 dpi 108 dots 609 dpi 216 dots	203 dpi 72 dots 305 dpi 108 dots	Yes/Yes
		[VOID Print]			[Disabled]		Yes/Yes
		[Retry Count]			0		Yes/Yes
		[Host Notification]			[Disabled]		Yes/Yes
		[Logs]
			[Copy]		-		-
			[Remove]		-		-
[Clone]					[Excl. LAN/Wi-Fi/IP]		-
[Clone Notice Setting]					[Disabled]		Yes/Yes
[Support Info]					-		-
[Logging Function]
	[Enabled]				[Disabled]		Yes/Yes
	[Save]				-		-
	[Delete]				-		-
[Startup Guide]					[Enabled]		No/Yes