[Applications] Menu

Initial values refer to the values set for the product when it was shipped from the factory. If you reset the product, the values set in the product are initialized. The table below shows the initial value of each setting item and whether it would be initialized.

•	[Protocol]/[Auto Switch Group]/[SBPL]

•	[SZPL]/[SIPL]

•	[SDPL]/[AEP]

• Normally, it is not necessary to perform the initialization. Doing an initialization removes all the product's settings that the customer changed.

　

•	[Protocol]/[Auto Switch Group]/[SBPL]

Setting Item				Initial Value		Initialized by User Reset/Factory Reset
				S84NX	S86NX
[Protocol]				[AUTO]		Yes/Yes
[Auto Switch Group]
	[SBPL]			[Enabled]		Yes/Yes
	[SZPL]			[Enabled]		Yes/Yes
	[SIPL]			[Enabled]		Yes/Yes
	[SDPL]			[Enabled]		Yes/Yes
[SBPL]
	[Show Error]			[Disabled] RFID models: [Enabled]		Yes/Yes
	[Standard Code]			[Enabled]		Yes/Yes
	[Orientation]			[Portrait]		Yes/Yes
	[Font Settings]
		[Zero Slash]		[Enabled]		Yes/Yes
		[Kanji]
			[Kanji Set]	[GB18030]		Yes/Yes
			[Character Code]	[GB18030]		Yes/Yes
			[Kanji Style]	[Gothic]		Yes/Yes
		[Proportional]		[Enabled]		Yes/Yes
		[Code Page]		858		Yes/Yes
		[€]		d5		Yes/Yes
	[Compatible]
		[M-8400 Compatibility]		[Disabled]		Yes/Yes
		[CODE128(C) Zero Fill]		[Disabled]		Yes/Yes
		[Kanji Command]		[Disabled]		Yes/Yes
		[Call Font/Logo]		[Disabled]		Yes/Yes
		[OCR Font]		[Enabled]		Yes/Yes
		[A3 Command Save(S-type)]		[Enabled]		Yes/Yes
		[PDF417 ECC Level fixed]		[Disabled]		Yes/Yes
		[Human Readable Overwrite]		[Disabled]		Yes/Yes
		[Head Size]		-	[Normal]	Yes/Yes
		[Darkness]		[Disabled]		Yes/Yes
		[Multiple A Command]		[Disabled]		Yes/Yes

　

•	[SZPL]/[SIPL]

Setting Item				Initial Value		Initialized by User Reset/Factory Reset
				S84NX	S86NX
[SZPL]
	[Label]
		[Shift]		0 dot		Yes/Yes
		[Top]		0 dot		Yes/Yes
	[Label Rotation]			[0 degree]		Yes/Yes
	[Caret]			94 (^)		Yes/Yes
	[Delimiter]			44 (,)		Yes/Yes
	[Tilde]			126 (~)		Yes/Yes
	[Clock Format]			[(none)]		Yes/Yes
	[Default Font]			[(none)]		Yes/Yes
	[Format Convert]			[(none)]		Yes/Yes
[SIPL]
	[Font Settings]
		[Code Page]		1252		Yes/Yes
		[New Font Encoding]		[Disabled]		Yes/Yes
		[c20 Proportional Pitch]		[Disabled]		Yes/Yes
		[Zero Slash]		[Disabled]		Yes/Yes
	[Format Save]			[Enabled]		Yes/Yes
	[Label Rotation]			[0 degree]		Yes/Yes

　

•	[SDPL]/[AEP]

Setting Item				Initial Value		Initialized by User Reset/Factory Reset
				S84NX	S86NX
[SDPL]
	[Control Code]
		[Code Type]		[Standard]		Yes/Yes
		[SOH]		01		Yes/Yes
		[STX]		02		Yes/Yes
		[CR]		0D		Yes/Yes
		[CNTBY]		5E		Yes/Yes
	[Label Rotation]			[0 degree]		Yes/Yes
	[SOP Emulation]			[Auto]		Yes/Yes
	[Compatible Mode]
		[TTF]		[Disabled]		Yes/Yes
		[Graphics]		[Disabled]		Yes/Yes
		[Compression]		[Disabled]		Yes/Yes
	[Right-to-Left print]			[Auto]		Yes/Yes
	[Receive TimeOut]			0 (Off)		Yes/Yes
	[Blank Item Feed]			[Enabled]		Yes/Yes
	[Prioritize]
		[Format Attribute]		[Commands]		Yes/Yes
		[Pause Mode]		[Commands]		Yes/Yes
		[1 Byte Codepage]		[Commands]		Yes/Yes
		[SDPL Measure Unit]		[Commands]		Yes/Yes
		[Scalable Font Style]		[Commands]		Yes/Yes
		[Sensor Type]		[Commands]		Yes/Yes
		[Feedback Character]		[Commands]		Yes/Yes
		[SOH Commands]		[Commands]		Yes/Yes
		[Module Selection]		[Commands]		Yes/Yes
	[Format Attribute]			[XOR]		Yes/Yes
	[Pause Mode]			[Disabled]		Yes/Yes
	[1 Byte Codepage]			[CP 850]		Yes/Yes
	[SDPL Measure Unit]			[Inch]		Yes/Yes
	[Scalable Font Style]
		[Bold]		[Disabled]		Yes/Yes
		[Italic]		[Disabled]		Yes/Yes
	[Feedback Character]			[Enabled]		Yes/Yes
	[SOH Commands]
		[All Commands]		[Enabled]		Yes/Yes
		[SOH-B Command]		[Enabled]		Yes/Yes
		[SOH-C Command]		[Enabled]		Yes/Yes
		[Others]		[Enabled]		Yes/Yes
	[Module Selection]			A		Yes/Yes
[AEP]
	[Enable]			[Disabled]		No/Yes
	[Starting Application]			[Simple Standalone]		No/Yes
	[Delete Application]			-		-
	[Label Rotation]			[Disabled]		Yes/Yes