TOP > Various Settings of the Product > The Product's [Settings] Menu > [Printing] Menu [Printing] Menu [Label Length] [Label Width] [Auto Measure] [Printing Mode] [Ribbon Near End] [Speed] [Sensor Type] [Print Mode] [Backfeed] [Darkness Range] [Darkness] [Imaging] [Advanced] The following settings are available in the [Printing] menu: Label Length Set the length of the media. Label Width Set the width of the media. Auto Measure Automatically measure the length of the media. Printing Mode Set whether to print using a ribbon or direct thermal media. Ribbon Near End Enable or disable the warning when the ribbon is about to run out. ◦ Appears if you have selected [Use Ribbon] in the [Printing Mode] menu. Speed Set the print speed. Sensor Type Set the media sensor type. Print Mode Manually set the print mode. Backfeed Set the backfeed operation. Darkness Range Set the range of the print darkness. Darkness Set the print darkness. Imaging Set the print reference position in the vertical and horizontal directions. Advanced Set the sensor operation and print motion. Back to top