[Advanced]

[Calibrate]

[Head Check]

[Head Check Mode]

[Every Page]

[Check Media Size]

[Check Area Size]

[Adjustments]

[Start Online]

[Feed After Error]

[Feed At Power On]

[Finisher Feed]

[Paper End]

[Prioritize]

[Reprint]

[Print End Position]

[Label Near End]

[Receive After Reset]

[Feed After Error Message]

[Job Name Display]

[Virtual Sensor Position]

[Print Start Position]

[Ribbon Near End Level]

[Paper End Output Timing]

[Ribbon End Sensor]

[Label End Sensor]

Set detailed sensor operation and print motion.

The setting items are as follows:

Calibrate

Adjust the media sensor.

Head Check

Check if there is a broken element of the print head.

Head Check Mode

Set the mode for head check.

◦	Appears if you have selected [All] or [Barcode] in the [Head Check] menu.

Every Page

Set the interval for head check.

◦	Appears if you have selected [Every Page] in the [Head Check Mode] menu.

Check Media Size

Enable or disable media size check.

Check Area Size

Enable or disable print area error check.

Adjustments

Correct the offset value, print position and print darkness.

Start Online

Set whether to power on the product in Online mode.

Feed After Error

Set whether to automatically feed the media when recovering from an error.

Feed At Power On

Set whether to automatically feed the media when the product is powered on.

Finisher Feed

Set the length to feed after printing.

Paper End

Select the sensor for sensing the paper end.

Prioritize

For product settings, set whether to prioritize the settings that are done through the product or through commands.

Reprint

Enable or disable the reprint function.

Print End Position

Set the stop position of the media.

Label Near End

Enable or disable the warning when the media is about to run out.

Receive After Reset

Set whether to automatically go online when recovering from a reset and switching to Online mode.

Feed After Error Message

Set whether to show the "Press Feed" message after recovering from an error, for errors that can be recovered from by opening and closing the head.

Job Name Display

Set whether to show the name of the job on the display when the received data includes the job name specification command ESC+WK.

Virtual Sensor Position

Input the virtual dimension from the media sensor to the print head to use the virtual sensor function to adjust the feed capacity.

Print Start Position

If you have selected [I-Mark] in the [Sensor Type] menu, set the reference position to start printing.

Ribbon Near End Level

Select the amount of ribbon remaining when the end of the ribbon is detected.

◦	Appears if you have selected [Use Ribbon] in the [Printing Mode] menu.

Paper End Output Timing

Sets the timing for when a paper end occurs.

◦	Appears if you have selected [Dispenser] in the [Print Mode] menu.

Ribbon End Sensor

Sets whether a ribbon end error occurs when the end of the ribbon is detected by the ribbon end sensor (option).

◦	Appears if you have selected [Use Ribbon] in the [Printing Mode] menu.

Label End Sensor

Sets whether a label end error occurs when the end of the label is detected by the label end sensor (option).