TOP > Various Settings of the Product > The Product's [Settings] Menu > [Printing] Menu > [Advanced] > [Finisher Feed] [Finisher Feed] Set the amount of media that is fed when dispensing stops. Set the media feed amount based on the print head position of 0. The actual media feed amount is the value of [Offset] + [Finisher Feed]. The setting range varies depending on the print resolution of the product. The setting range is as follows: Resolution Setting range 203 dpi (1 dot = 0.125 mm (0.0049")) 0 to 2040 dots 305 dpi (1 dot = 0.083 mm (0.0033")) 0 to 3060 dots • To modify this setting, contact your SATO sales representative. • A message prompting you to restart the product will appear on the Online/Offline screen if you have made any changes. In such a case, reboot the product to apply the settings. Related Topics Setting Value Input or Selection Back to top