CL4NX/CL6NX Operator Manual
SATO

MENU

How to Search

MENU

  • TOP (Table of Contents)
  • Getting Started
  • Searching from Category
  • Searching by Function Names
  • Searching According to What You Want to Do
  • Troubleshooting
  • Support and Warranty
Close
TOP > Various Settings of the Product > The Product's [Settings] Menu > [Printing] Menu > [Advanced] > [Head Base Position]
[Head Base Position]
Set the position used for the base reference point for printing.
The options are as follows:
Item
CL4NX
CL6NX
[Standard]
Print with a standard base reference point.
Print with a standard base reference point.
[Left-justify]
Move the base reference point 2 mm (0.08") to the left toward the product.
Expand the width of the printable area (maximum print width) to 167.5 mm (6.59").
Move the base reference point 2 mm (0.08") to the left toward the product.
 
 
•
A message prompting you to restart the product will appear on the Online/Offline screen if you have made any changes. In such a case, reboot the product to apply the settings.

Related Topics
Printable Area
Hardware

Back to top

© 2023 SATO Corporation. All rights reserved.