TOP > Various Settings of the Product > The Product's [Settings] Menu > [Interface] Menu > [RFID] (RFID Models Only) > [SATO RF Analyze] [SATO RF Analyze] Set and execute the SATO RF Analyze function, and save the results of the measurements. SATO RF Analyze is a function of the product that allows you to adjust the read/write conditions in accordance with the RFID tags you are using after configuring them according to the Inlay Configuration Guide. Setting Measurement Conditions Before executing measurement, set the search level, writing/reading power (UHF modules only), and name for saving as an RFID tag model. Set the writing/reading power according to the Inlay Configuration Guide. For details, access the following URL: https://www.sato-global.com/rfid/guide.html To use inlays that are not in the Inlay Configuration Guide, use the initial values. Appears only if the module is UHF. The setting items are as follows: Search Start Execute SATO RF Analyze. Search Level Set the search level for SATO RF Analyze. Write Power Set radio power level used to write information to inlay. Read Power Set radio power level used to read information from inlay. Save settings Name the results of the SATO RF Analyze and save them as an RFID tag model. Back to top