TOP > Various Settings of the Product > The Product's [Settings] Menu > [Interface] Menu > [RFID] (RFID Models Only) [RFID] (RFID Models Only) [Antenna Position] [Write Power] [Read Power] [Tag Offset] [View] [Filter Function] [Retry Mode] [Retries] [Mark bad tags] [RFID Undetected Warning] [Log RFID Data] [Data To Record] [Output Error Mode] [Pulse Length] [Counters] [Paper] [SATO RF Analyze] [RFID Tag Model] Set the RFID. Appears only for the RFID model. The setting items are as follows: Antenna Position Set an RFID antenna to use. Write Power Set radio power level used to write information to inlay. Read Power Set radio power level used to read information from inlay. Tag Offset Set the offset value and the writing operation for when data is written to an inlay. Reader Model Shows the RFID module model. Reader Version Shows the RFID module firmware version. PLD Version Shows the RFID module PLD version. View Shows the inlay data. Filter Function Set the RSSI filter function. Retry Mode Set whether to retry encoding of failed data when an RFID error occurs. Retries Set the number of times the retry/release operations are repeated before printing stops and the RFID error screen opens, when an RFID error occurs. Mark bad tags Set the error print for the RFID tag error. RFID Undetected Warning Set a warning message that occurs when the RFID commands are undetected. Log RFID Data Set the log function to record the encoded tag information. Data To Record Set the data to be recorded. Output Error Mode Set the signal type for RFID errors. Pulse Length Set the length of an RFID error pulse. ◦ Appears only if you have selected [Pulse] in the [Output Error Mode] menu. Counters Shows the RFID counter. Paper Set the paper type of RFID tags and the print reference position in the vertical direction. SATO RF Analyze Set and execute the SATO RF Analyze function, and save the results of the measurements. RFID Tag Model Register, edit, read, and delete RFID tag models. Back to top