CT4-LX Operator Manual
SATO

MENU

MENU

  • TOP (Table of Contents)
  • Getting Started
  • Searching from Category
  • Searching by Function Names
  • Searching According to What You Want to Do
  • Troubleshooting
  • Support and Warranty
Close
TOP > Loading Media and Ribbon > Settings to Match the Media > Print Method (Combined Direct Thermal/Thermal Transfer Model Only)
Print Method (Combined Direct Thermal/Thermal Transfer Model Only)
For the combined direct thermal/thermal transfer model, you can select from two types of print methods.
Thermal transfer
Prints using a ribbon.
Direct thermal
Prints using direct thermal media.
 
•
Ribbon is not necessary if you are using direct thermal media.
 
The print method can be set through the Startup Guide, Media Startup, and Media Profiles Registration. Alternatively, the following procedure can be used.
1.
Tap [SETTINGS] on the Home screen or Offline screen.
2.
Input the password if it is enabled.
3.
Tap [Printing].
4.
Tap [Printing Mode].
5.
Select the print method.
[Use Ribbon]
Prints using a ribbon.
[Direct Thermal]
Prints using direct thermal media.

Related Topics
Startup Guide Flow
Setting Batch Print Settings in Media Startup (When Using Only One Type of Media)
Registering Print Settings as Media Profiles (When Using Multiple Types of Media)
Logging In to/Logging Out of the Settings Mode

Back to top

© 2019 SATO Corporation