Cleaning Intervals

Clean the product at the following regular intervals.

• The below cleaning intervals are only for reference. Clean the product when necessary even if you are not at a regular interval.

•	After you print ten media rolls or print media for 500 meters (1640.4 feet).

Use the cleaning kit to clean following parts:

◦	Print head

◦	Platen roller

◦	Media sensors

◦	Media guide

◦	Media route

•	After you print twenty media rolls and linerless labels or print media for 1,000 meters (3280.8 feet).

Use the cleaning sheet to clean the following parts:

◦	Print head

•	After you print one media roll of the linerless label, print media for 70 meters (229.7 feet) or whenever there is any glue residue or paper dust on the media route.

Use the cleaning kit to clean following parts:

◦	Print head

◦	Media guide

◦	Media sensors

◦	Linerless platen roller

Use an adhesive cotton swab to clean the following parts:

◦	Cutter blade

◦	Cutter cover

• When using the linerless cutter kit, before cleaning it, refer to the cleaning procedures, which differ according to the type of the cutter (Type 1/Type 2). • The adhesive cotton swabs for cleaning are supplied with the optional linerless cutter kit.

---

Related Topics

Cleaning Using the Cleaning Kit (with Optional Linerless Cutter Kit (Type 1))

Cleaning Using the Cleaning Kit (with Optional Linerless Cutter Kit (Type 2))