Accessing to the Web Configuration Page

The product can be operated through a web configuration page using any browser.

With an Ethernet LAN or WLAN connection, users can remotely get information from the product or perform the product settings.

• You need the product's IP address to access the web configuration page. The product's IP address can be checked in [Settings] > [Information] > [IPv4 Address]. • If the product's [Settings] > [Interface] > [Network] > [Advanced] > [Firewall] > [Enable] menu is set to [Enabled], [Settings] > [Interface] > [Network] > [Advanced] > [Firewall] > [Allow Services And Ports] > [WebConfig] must be set to [Enabled].

1.	Open up the browser and enter the product's URL.

If the product's IP address is 192.168.143.123, enter the following URL: https://192.168.143.123

When a security certificate is prompted, you must acknowledge and click Continue.

The web configuration page for the product appears. On the upper right (1) of each page, the model name, current resolution and MAC address are shown.

2.

Log in.

You can view a part of the [Dashboard] page without logging in.

a.	Click [Login] (2).

b.	Select [settings] for the user, enter the password, and click [Login].

• The default setting for user is [settings], and for password is "USB serial number (8 digits of uppercase English letters and numerals) +user". Input "+" with a symbol. You can confirm the USB serial number in the following ways. ◦ [USB Serial] item on [Device] on the [Dashboard] page of the web configuration page ◦ [Information] > [USB Serial] menu ◦ Test print results executed by [Tools] > [Test Print] > [Configure List] menu • Change the password to secure the use of the product. Select [level1] in the [System] > [Password] > [Change Password] menu and set a new password.

3.	Click on the page (3) you want to view.

---

Related Topics

[IPv4 Address]

[Configure List]

[Allow Services And Ports]

[USB Serial]

[Change Password]