Dashboard

[Dashboard] is the default page for the web configuration page. Each section shows specific information or the current status of the product.

(1) [Printer Status]

Shows the current state (online, offline, error) and current status icons.

(2) [Printing]

Shows the print speed, darkness, sensor, print mode and backfeed setting.

(3) [Device]

Shows the model, current resolution and options that are installed.

(4) [System]

Shows the current firmware version, uptime, SNMP contact, name and location.

(5) [Network]

Shows the current IP address and MAC address of the active interface.

• Click [Login] to log in for viewing. The default setting for user is [settings], and for password is "USB serial number (8 digits of uppercase English letters and numerals) +user". Input "+" with a symbol. You can confirm the USB serial number in the following ways. ◦ [USB Serial] item on [Device] on the [Dashboard] page of the web configuration page ◦ [Information] > [USB Serial] menu ◦ Test print results executed by [Tools] > [Test Print] > [Configure List] menu

(6) [Wi-Fi]

Shows the current Wi-Fi setting.

• Click [Login] to log in for viewing. The default setting for user is [settings], and for password is "USB serial number (8 digits of uppercase English letters and numerals) +user". Input "+" with a symbol. You can confirm the USB serial number in the following ways. ◦ [USB Serial] item on [Device] on the [Dashboard] page of the web configuration page ◦ [Information] > [USB Serial] menu ◦ Test print results executed by [Tools] > [Test Print] > [Configure List] menu • This information is shown only if Wi-Fi is available and active.

(7) [Wi-Fi Strength]

Shows the current Wi-Fi communication strength.

• If the product is P2P GO, the Wi-Fi Strength will not be shown.

---

Related Topics

Accessing to the Web Configuration Page

[Configure List]

[USB Serial]