[Battery] Menu

Appears only if you have installed the optional battery mount kit.

The following settings are available in the [Battery] menu:

[Health]

Shows the battery condition.

The statuses are as follows:

Good

Battery is in a good condition for use.

Replace

Battery is in a condition that requires replacement.

Poor

Battery is deteriorated and in a condition that requires replacement.

[Cycle Counts]

Shows the cycle count (charge/discharge cycle).

[Eco Charge]

Enable or disable the Eco Charge function.

The Eco Charge function is designed to extend the battery life by keeping the after-charged volume of the battery a little lower than the fully charged volume, thus delaying the degree of deterioration.

• When using the product with the optional cradle kit, it is recommended to enable the Eco Charge function.

[Full Charge Power-Off]

Set up the productʼs power-off function after charging is complete.

While the product is paused in Online/Offline screen, the product powers off 3 seconds after it completes charging.

Conditions to disable the Fully-Charge Power-Off function

•	While the product is printing or feeding the media.

•	While the product button is being used.

•	During Adjustments or Settings mode.

•	While the product receives the data.

•	When an AC adapter is removed.

•	When the product has restarted charging after a certain amount of battery discharge.

•	While an error related to the battery is occurring.

• When using the product with the optional cradle kit, it is recommended to enable the Full Charge Power-Off function. • The product powers off even if an error has occurred, if there is no change in the error status.

---

Related Topics

Settings Mode Operations

Setting Value Input