[SNMP]

TOP > Various Settings of the Product > The [Settings] Menu > [Interface] Menu > [Network] > [Services] > [SNMP]

[SNMP]
Set the functions for SNMP.
The SNMP function enables you to monitor and manage a UDP/IP based network.
The setting items are as follows:
[sysContact]
Set the contact information.
You can enter 0 to 255 characters. Alphabets, numbers and symbols can be used.
[sysName]
Set the name information.
You can enter 0 to 255 characters. Alphabets, numbers and symbols can be used.
[sysLocation]
Set the location information.
You can enter 0 to 255 characters. Alphabets, numbers and symbols can be used.
[prtMarkerCounterUnit]
Set the unit to use for reporting counter values for subunits.
The options are as follows:
impressions
Report the number of printed labels.
meters
Report the length of printed labels in meters.
[Agent]
Set the Agent function.
The setting items are as follows:
[Enable]
Enable or disable the functions for Agent.
[Read-Only]
Set the read-only function.
The setting items are as follows:
[SNMP Version]
Set the SNMP version.
The options are as follows:
•
[1|2c|3]
•
[1|2c]
•
[3]
•
[Disabled]
[Community]
Set the read-only community name.
Appears only if you have selected [1|2c|3] or [1|2c] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: public
[User]
Set the read-only user name.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: rouser
[User Security]
Set the read-only security level.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
The options are as follows:
•
[None]
•
[Authentication]
•
[Privacy]
[Authentication Protocol]
Set the authentication protocol.
Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
The options are as follows:
•
[MD5]
•
[SHA]
[Authentication Passphrase]
Set the authentication passphrase.
Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Privacy Protocol]
Set the privacy protocol.
Appears only if you have selected [Privacy] in the [User Security] menu.
The options are as follows:
•
[DES]
•
[AES]
[Privacy Passphrase]
Set the privacy passphrase.
Appears only if you have selected [Privacy] in the [User Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Read-Write]
Set the read-write function.
The setting items are as follows:
[SNMP Version]
Set the SNMP version.
The options are as follows:
•
[1|2c|3]
•
[1|2c]
•
[3]
•
[Disabled]
[Community]
Set the read-write community name.
Appears only if you have selected [1|2c|3] or [1|2c] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: private
[User]
Set the read-write user name.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: rwuser
[User Security]
Set the read-write security level.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
The options are as follows:
•
[None]
•
[Authentication]
•
[Privacy]
[Authentication Protocol]
Set the authentication protocol.
Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
The options are as follows:
•
[MD5]
•
[SHA]
[Authentication Passphrase]
Set the authentication passphrase.
Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Privacy Protocol]
Set the privacy protocol.
Appears only if you have selected [Privacy] in the [User Security] menu.
The options are as follows:
•
[DES]
•
[AES]
[Privacy Passphrase]
Set the privacy passphrase.
Appears only if you have selected [Privacy] in the [User Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Traps]
Set the Traps function.
The setting items are as follows:
[Enable]
Enable or disable the functions for Traps.
[SNMP Version]
Set the SNMP version.
The options are as follows:
•
[1]
•
[2c]
•
[3]
[IP Version]
Set the IP version to use for trap destinations.
The options are as follows:
4
Set the IP version to IPv4.
6
Set the IP version to IPv6.
[Destinations]
Set the number of trap destinations.
The setting range is from 1 to 3.
[Destination 1]
Set address 1 for the trap destination.
The displayed IP version differs depending on the [IP Version] setting.
[Destination 2]
Set address 2 for the trap destination.
The displayed IP version differs depending on the [IP Version] setting.
Appears only if you have selected [2] or [3] in the [Destinations] menu.
[Destination 3]
Set address 3 for the trap destination.
The displayed IP version differs depending on the [IP Version] setting.
Appears only if you have selected [3] in the [Destinations] menu.
[Community]
Set the Traps community name.
Appears only if you have selected [1] or [2c] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: trapcom
[User]
Set the Traps user name.
Appears only if you have selected [3] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: trapuser
[Engine ID]
Set the engine ID.
Appears only if you have selected [3] in the [SNMP Version] menu.
Initial setting: Created from the MAC address.
Hexadecimal characters are allowed and the range is from 10 to 64 characters. (Only an even number of characters is allowed.)
[Security]
Set the security level.
Appears only if you have selected [3] in the [SNMP Version] menu.
The options are as follows:
•
[None]
•
[Authentication]
•
[Privacy]
[Authentication Protocol]
Set the authentication protocol.
Appears only if you have selected [Authentication] or [Privacy] in the [Security] menu.
The options are as follows:
•
[MD5]
•
[SHA]
[Authentication Passphrase]
Set the authentication passphrase.
Appears only if you have selected [Authentication] or [Privacy] in the [Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Privacy Protocol]
Set the privacy protocol.
Appears only if you have selected [Privacy] in the [Security] menu.
The options are as follows:
•
[DES]
•
[AES]
[Privacy Passphrase]
Set the privacy passphrase.
Appears only if you have selected [Privacy] in the [Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
Related Topics
Settings Mode Operations
Setting Value Input