Accessing to the Web Configuration Page

The product can be operated through a web configuration page using any browser.

With a WLAN connection, users can remotely get information from product or perform the product settings.

• You need the product's IP address to access the web configuration page. The product IP address can be checked in [Information] > [Wi-Fi]. • If the product's [Settings] > [Interface] > [Network] > [Advanced] > [Firewall] > [Enable] menu is set to [Enabled], [Settings] > [Interface] > [Network] > [Advanced] > [Firewall] > [Allow Services And Ports] > [WebConfig] must be set to [Enabled].

1.	Open up the browser and enter the product's URL.

If the product's IP address is 192.168.143.123, enter the following URL: https://192.168.143.123

When a security certificate is prompted, you must acknowledge and click Continue.

2.	Select [manager] for the user, enter the password, and click [Login].

• The login screen is displayed when using firmware version 7.5.0 or later. If the login screen does not appear, click [Login] in the upper‑right corner of the page. • The default setting for user is [manager], and for password is "PCB serial number (8 digits of uppercase English letters and numerals) +user". You can confirm the PCB serial number by executing [Configure List] from the [Tools] > [Test Print] menu. ◦ Input "+" with a symbol. • Change the password to secure the use of the product. Set a new password in the [System] > [Password] > [Change Password] menu.

The web configuration page for the product appears. On the upper right (1) of each page, the model name, current resolution and MAC address are shown.

3.	Click on the page (3) you want to view.

---

Related Topics

[Configure List]

[Allow Services And Ports]

[Wi-Fi]

[Change Password]