[SZPL]

To use SZPL as a printer command, set the following items:

[Label]

Set the print position.

The setting items are as follows:

[Shift]

Set the shift offset position of the label.

The setting range is from -960 to +960 dots.

• The length of 1 dot is 0.083 mm (0.0033"). • You can change the units to dots, " (inches), or mm in the [System] > [Regional] > [Unit] menu.

[Top]

Set the top offset position of the label.

The setting range is from -120 to +120 dots.

• The length of 1 dot is 0.083 mm (0.0033"). • You can change the units to dots, " (inches), or mm in the [System] > [Regional] > [Unit] menu.

[Caret]

Set the caret (^) code.

The setting range is from 0 to 255.

• Each code (Caret, Delimiter and Tilde) must be set to different values.

[Delimiter]

Set the delimiter (,) code.

The setting range is from 0 to 255.

• Each code (Caret, Delimiter and Tilde) must be set to different values.

[Tilde]

Set the tilde (~) code.

The setting range is from 0 to 255.

• Each code (Caret, Delimiter and Tilde) must be set to different values.

[Clock Format]

Set the date format.

The options are as follows:

•

[(none)]

•	[MM/DD/YY (24-hour clock)]

•	[MM/DD/YY (12-hour clock)]

•	[DD/MM/YY (24-hour clock)]

•	[DD/MM/YY (12-hour clock)]

---

Related Topics

Settings Mode Operations

Setting Value Input

[Unit]